- Home
- Equipment
Refine by
Fh Schule Xprt Equipment & Supplies
6 equipment items found
Manufactured by:F.H. Schule Mühlenbau GmbH based inReinbek, GERMANY
No matter if you are producing oat, rice, pea or wheat flakes - after flaking and subsequent drying and cooling, the flakes are fed directly into the inlet of the vibration screen. A product distributor in the inlet of the vibration screen spreads the product evenly on the top screen which separates lumps that may have formed. The screened product falls onto the lower screen, where the good ...
Manufactured by:F.H. Schule Mühlenbau GmbH based inReinbek, GERMANY
Both raw oats and oat kernels can be treated using the Schule kiln. Through direct addition of steam between the prebin and the kiln, heat and moisture are introduced into the product before it enters the kiln. As it passes through the kiln, it comes into contact with the so-called heating loops in compartments arranged on top of each other. Depending on the required capacity and temperature, the ...
Manufactured by:F.H. Schule Mühlenbau GmbH based inReinbek, GERMANY
The SCHULE soaking tank makes it easy to increase the product moisture. It is made completely of stainless steel, features a conical outlet, and is closed by means of a slide. Above the slide there is a screen insert with a water drain behind it. A water pump ensures constant circulation of the soaking water by pumping the water through the inlet socket at the top of the tank. The water can be ...
Manufactured by:F.H. Schule Mühlenbau GmbH based inReinbek, GERMANY
The product to be hulled is fed to the rotating centrifugal wheel via an immersion tube that regulates the throughput rate. A rotary knob with position indicator ensures reproducible settings. Inside the centrifugal wheel, the product is orientated and thrown against an impact ring by centrifugal ...
Manufactured by:F.H. Schule Mühlenbau GmbH based inReinbek, GERMANY
The product is fed into the machine through the inlet and is directly distributed on the entire drier width. In the first section, hot air flows through the product from the bottom to the top, and an oscillating movement of the machine conveys it to the next section. In the second section, the product is cooled by ambient air and conveyed to the drier ...
Manufactured by:F.H. Schule Mühlenbau GmbH based inReinbek, GERMANY
The product is fed in through the inlet and is directly distributed over the entire width of the machine. Due to the oscillating movement of the machine and the air flow over the entire surface, the grain is uniformly cooled and transported through the cooler. Various setting options ensure optimum adaptation of the cooling process to the input product. ...